MTX X3000D - X THUNDER Series

The Biggest, Baddest, Boldest, Most Powerfull Amp in the XTHUNDER series is now available in Europe

This Monster 3000W Class-D Mono Block amp features double 1/0 Awg power connectors to get you all the power you need from your X3000D.

For serious Bassheads and powerjunkies it is very easy to link two X3000D amps together via the Master/Slave circuitry.

The X3000D can tame each sub you connect to it. You can go down to a 1 Ohm load and the amp will still be laughing while ripping out Thunderous bass from the cone of the connected woofer(s).

Go ahead and take the new Rated X X3000D amp for a ride if you are brave enough.

MTX X3000D Specifications:

• CEA RMS Power : 1×1500W @ 4Ohm, 14,4 Volts
• CEA RMS Power : 1×2000W @ 2Ohm, 14,4 Volts
• CEA RMS Power : 1×3000W @ 1Ohm, 14,4 Volts
• 2 Amps strapped : 1×4000W @ 4Ohm, 14,4 Volts
• 2 Amps strapped : 1×6000W @ 2Ohm, 14,4 Volts
• Low pass X-over : 24dB variable from 40 to 200Hz
• Minimum Impedance : 1Ohm
• Frequency response : 20Hz - 250Hz ±3dB
• THD+N / 1W : <0,5%
• S/N ratio : >65dB
• Sensitivity : 0,25 to 5Volts
• Subsonic filter : 12dB variable from 20 to 50Hz
• Phase Switch : 0 or 180
• Dimensions : 58,0×21,0×5,0cm

MTX X3000D Key Feautures:

• Class D amp dedicated to power subwoofers
• Variable Low pass x-over
• Variable subsonic filter
• Phase switch 0O or 180O
• Master/Slave function for strapping 2 amps
• EBC remote included
• 1 Ohm compatible
• Low impedance protection
• Thermal protection
• Regulated PWM MOSFET power supply
• Oversized number of Mosfet on the final stage and the power supply
• New BTR connectors
• Double power connectors
• 100% garanteed power according to CEA norms
• All connectors on one side

More info: MTXaudio.eu